French Automotive Plastics Association Warns of “Impending Crisis” Amid PA 6.6 Shortage
2018-10-11    [Source:PNE]

The association of French automotive plastic parts-makers (GPA) has warned of an impending crisis due to the shortage of key polyamide 6.6 materials in the region.

In a statement 5 Oct, the GPA said the ongoing nylon 6.6 shortage could put the automotive industry in “serious difficulty” and urged car makers to find alternative solutions.

Describing it as a “structural problem”, GPA said the shortage is mainly rooted in the low supply of adiponitrile (ADN), currently produced globally at only five global locations in France, Japan and the US.

“Numerous plastics manufacturer… have interrupted their production of PA 6.6 and imposed quotas on their customers,” said GPA, noting the increasing number of force majeures by leading materials suppliers.

PA 6.6 has been registered by carmakers for its technical properties, and according to GPA’s president, Luc Messien, the processes to approve new materials make it very difficult to find alternative solutions in the short term.

The material is used in an increasing number of applications, in particular in electronics, and the shortage has driven the 40% increase in prices since the beginning of the year.

PA 6.6 is highly resistant to high temperatures, making it suitable for under the hood applications, such as air supply systems, filtration and cooling systems, and in other interior parts, from pedal units to door handles.

In response to the tight supply, the GPA statement called on plastics manufacturers to “quickly open new production lines and to secure their supply chain.”

“Today, only 55% of Europe’s PA 6.6 production capacity is available. At the same time, current demand requires an increase in the production capacity. Hasn’t the time come to speed up investments in Europe and renovate the existing lines?” said Armelle Dumont, managing director of the GPA.

Parallel to that, the French association has urged automotive suppliers to find “alternative solutions” despite all the complexities.

Finding an alternative is complex as any new material's specifications should match those of PA 6.6. Such materials are often even scarcer and more expensive compared to PA 6.6.

In addition, the processes to approve new materials take a very long time.

To address the latter issue, Dumont has called on carmakers to help by shortening their approval processes.

"These shortages of materials mean that supplies to certain members of the GPA will dry up at the start of 2019, a situation that could put the complete production chain in peril,” Dumont warned.

European Tier 1 and Tier 2 automotive plastic suppliers have seen PA 6.6 prices rise by €1,500/tonne in the last 18 months.

“They are the victims of an unsustainable scissors' effect brought on by the rise in the price of PA 6.6, the quotas and their customers’ refusal to pay for a part of these price hikes,” GPA concluded.

The supply of PA 6.6 was hampered in Europe due mainly to strikes at Butachemie, which is the only European supplier of AND from its plant in Chalampe, France.

Additionally, in August, Belgian materials supplier Solvay SA said its polyamides activities were temporarily impacted by the severe drop in water levels along the Rhine river following a drought in Central Europe.

German chemicals giant BASF also announced two force majeures for all its polyamide 6.6 polymers in January and June, as it had to shut down its hexamethylenediamine (HMD) plant in Seal Sands, UK, due to an "unexpected failure" of a site utilities unit.

Reprinted statement: This article is reprinted from other website, which only represents the opinions of the author and it does not represent the stand of this website. Please notify if violating the original author's copyright and we will remove it immediately.

About Us  |  Feedback  |  Clients  |  Contact
Tel: 0086-21-61250980 E-mail: Fax: 0086-21-61159277
© 2007 Suntower Consulting Limited.  All Rights Reserved  沪ICP备07503201号 gs沪公网安备31011202002186号